Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

eBore™ Üniversal

Filtreleri Seçin
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (27)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (27)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (27)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (27)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (27)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (27)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (27)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (27)
  • M Stainless Steel (27)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (27)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (27)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (27)
  • K Cast Iron (23)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (23)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (23)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (23)
  • N Non-Ferrous Materials (23)
    • N1
      Wrought Aluminum (23)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (23)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (23)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
    • N6
      Carbon, Graphite Composites, CFRP (23)
    • N7
      MMC's (23)
  • S High-Temp Alloys (27)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (27)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (27)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (27)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (27)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC (23)
    • H2
      Hardened Materials 48-55 HRC (23)
    • H3
      Hardened Materials 56-60 HRC (23)
    • H4
      Hardened Materials >60 HRC (23)
  • C CFRP Materials (23)
    • C1
      CFRP, CFRP / CFRP (23)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (23)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (17)
  • Blind Hole Finishing Blind Hole Finishing (17)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (17)
  • Through Hole Finishing Through Hole Finishing (17)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (23)
  • Lightly Interrupted Cut (27)
  • Smooth Cut (27)
  • Varying Depth of Cut (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 91.0 (4)
  • 92.0 (23)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • E-BORE Boring Bar (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (17)
  • 2.0 (17)
  • 3.0 (4)
  • 4.0 (17)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.65 in (2)
  • 0.669 in (3)
  • 1.772 in (1)
  • 1.891 in (1)
  • 2.086 in (1)
  • 2.087 in (1)
  • 2.165 in (1)
  • 2.265 in (1)
  • 2.282 in (2)
  • 2.479 in (1)
  • 2.676 in (1)
  • 2.677 in (1)
  • 2.873 in (1)
  • 3.071 in (1)
  • 3.269 in (1)
  • 3.661 in (2)
  • 3.858 in (2)
  • 4.449 in (2)
  • 4.843 in (1)
  • 5.63 in (1)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 16.5 mm (2)
  • 17.0 mm (3)
  • 45.0 mm (1)
  • 48.0 mm (1)
  • 52.975 mm (1)
  • 53.0 mm (1)
  • 55.0 mm (1)
  • 57.5 mm (1)
  • 57.975 mm (2)
  • 62.975 mm (1)
  • 67.976 mm (1)
  • 68.0 mm (1)
  • 72.976 mm (1)
  • 78.0 mm (1)
  • 83.0 mm (1)
  • 93.0 mm (2)
  • 98.0 mm (2)
  • 113.0 mm (2)
  • 123.0 mm (1)
  • 143.0 mm (1)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (23)
  • 0.002 in (23)
  • 0.004 in (27)
  • 0.008 in (23)
  • 0.016 in (23)
  • 0.031 in (23)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (23)
  • 0.05 mm (23)
  • 0.1 mm (27)
  • 0.2 mm (23)
  • 0.4 mm (23)
  • 0.8 mm (23)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (6)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (6)
Corner Chamfer Min - Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK10 (23)
  • HK1500 (23)
  • HK35 (23)
  • HT2 (23)
  • HTX (23)
  • HWK15 (23)
  • K10M (23)
  • K10P (23)
  • K10U (23)
  • K15U (23)
  • K20K (23)
  • K25M (23)
  • K313 (23)
  • K68 (23)
  • KB1610 (23)
  • KB1630 (23)
  • KB5610 (23)
  • KB5625 (23)
  • KB5630 (23)
  • KB9610 (23)
  • KBH10 (23)
  • KBH20 (23)
  • KC5010 (23)
  • KC5025 (23)
  • KC5410 (23)
  • KC720 (23)
  • KC730 (23)
  • KC732 (23)
  • KC8050 (23)
  • KC810 (23)
  • KC850 (23)
  • KC9010 (23)
  • KC9025 (23)
  • KC910 (23)
  • KC9105 (23)
  • KC9110 (23)
  • KC9120 (23)
  • KC9125 (23)
  • KC9225 (23)
  • KC9240 (23)
  • KC9240NEW (23)
  • KC9315 (23)
  • KC9320 (23)
  • KC9325 (23)
  • KC935 (23)
  • KC950 (23)
  • KC990 (23)
  • KCD25 (23)
  • KCK05 (23)
  • KCK05B (23)
  • KCK15 (23)
  • KCK15B (23)
  • KCK20 (23)
  • KCK20B (23)
  • KCM15 (23)
  • KCM15B (23)
  • KCM25 (23)
  • KCM25B (23)
  • KCM25S (23)
  • KCM35 (23)
  • KCP05 (23)
  • KCP10 (23)
  • KCP10B (23)
  • KCP20S (23)
  • KCP25 (23)
  • KCP25B (23)
  • KCP25C (23)
  • KCP30 (23)
  • KCS10 (23)
  • KCS10B (23)
  • KCS25S (23)
  • KCU10 (27)
  • KCU10B (23)
  • KCU25 (23)
  • KCU25B (23)
  • KD050 (23)
  • KD081 (23)
  • KD1400 (23)
  • KD1425 (23)
  • KN10S (23)
  • KT175 (23)
  • KT315 (23)
  • KT325 (23)
  • KTP10 (23)
  • KTP25S (23)
  • KU10 (23)
  • KU10T (23)
  • KU30T (23)
  • PB100 (23)
  • PB170 (23)
  • PB250 (23)
  • PB300 (23)
  • PD100 (23)
  • PD50 (23)
  • THM (23)
  • THM-X (23)
  • TN1000 (23)
  • TN10P (23)
  • TN10U (23)
  • TN15M (23)
  • TN15U (23)
  • TN2000 (23)
  • TN20K (23)
  • TN20P (23)
  • TN30M (23)
  • TN4000 (23)
  • TN5015 (23)
  • TN5020 (23)
  • TN5105 (23)
  • TN5120 (23)
  • TN7010 (23)
  • TN7015 (23)
  • TN7025 (23)
  • TN7035 (23)
  • TN7105 (23)
  • TN7110 (23)
  • TN7115 (23)
  • TN7125 (23)
  • TN7135 (23)
  • TN8025 (23)
  • TTI15 (23)
  • TTR (23)
  • TTS (23)
  • WBH10C (23)
  • WBH10P (23)
  • WBH10U (23)
  • WBH25P (23)
  • WDN00U (23)
  • WDN25U (23)
  • WK05CT (23)
  • WK15CT (23)
  • WK20CT (23)
  • WM15CT (23)
  • WM25CT (23)
  • WP15CT (23)
  • WP20TT (23)
  • WP25CT (23)
  • WS10PT (23)
  • WS25PT (23)
  • WU05PT (23)
  • WU10HT (23)
  • WU10PR (4)
  • WU10PT (23)
  • WU20HT (23)
  • WU25PT (23)
Hand Of Tool
Hand Of Tool
  • R (21)
Wiper Insert
Wiper Insert
  • N (21)
F Dimension
F Dimension
  • 0.151 mm (1)
  • 2.825 mm (2)
  • 3.825 mm (1)
  • 4.75 mm (1)
  • 4.775 mm (3)
  • 5.75 mm (2)
  • 5.775 mm (1)
  • 6.75 mm (2)
  • 6.775 mm (2)
  • 7.325 mm (1)
  • 7.75 mm (1)
  • 7.775 mm (2)
  • 9.775 mm (1)
  • 12.275 mm (1)
F Dimension Min - F Dimension Max
F Dimension
F Dimension
  • 0.006 in (1)
  • 0.111 in (2)
  • 0.151 in (1)
  • 0.187 in (1)
  • 0.188 in (3)
  • 0.226 in (2)
  • 0.227 in (1)
  • 0.266 in (2)
  • 0.267 in (2)
  • 0.289 in (1)
  • 0.305 in (1)
  • 0.306 in (2)
  • 0.385 in (1)
  • 0.483 in (1)
F Dimension Min - F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.0 mm (1)
  • 6.0 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (3)
  • 14.0 mm (4)
  • 15.0 mm (1)
  • 16.0 mm (3)
  • 20.0 mm (1)
  • 25.0 mm (1)
  • 29.0 mm (1)
  • 40.0 mm (1)
  • 52.0 mm (1)
  • 68.0 mm (1)
  • 76.0 mm (1)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.079 in (1)
  • 0.237 in (2)
  • 0.315 in (2)
  • 0.394 in (4)
  • 0.473 in (3)
  • 0.551 in (4)
  • 0.591 in (1)
  • 0.63 in (3)
  • 0.787 in (1)
  • 0.984 in (1)
  • 1.143 in (1)
  • 1.575 in (1)
  • 2.047 in (1)
  • 2.677 in (1)
  • 2.992 in (1)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.315 in (2)
  • 0.394 in (2)
  • 0.473 in (4)
  • 0.551 in (3)
  • 0.63 in (4)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.181 in (1)
  • 1.614 in (1)
  • 2.087 in (1)
  • 2.283 in (1)
  • 3.031 in (1)
  • 4.016 in (1)
  • 5.984 in (1)
Maximum Axial Groove Diameter Min - Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 8.0 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (4)
  • 14.0 mm (3)
  • 16.0 mm (4)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 30.0 mm (1)
  • 41.0 mm (1)
  • 53.0 mm (1)
  • 58.0 mm (1)
  • 77.0 mm (1)
  • 102.0 mm (1)
  • 152.0 mm (1)
Maximum Axial Groove Diameter Min - Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (21)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (21)
Maximum Bore Depth
Maximum Bore Depth
  • 0.787 in (1)
  • 0.906 in (1)
  • 1.102 in (1)
  • 1.104 in (1)
  • 1.181 in (1)
  • 1.298 in (1)
  • 1.338 in (1)
  • 1.574 in (1)
  • 1.693 in (1)
  • 1.695 in (1)
  • 1.907 in (1)
  • 2.165 in (1)
  • 2.277 in (1)
  • 2.757 in (2)
  • 2.953 in (2)
  • 3.543 in (2)
  • 3.938 in (1)
  • 4.724 in (1)
Maximum Bore Depth Min - Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 20.0 mm (1)
  • 23.0 mm (1)
  • 28.0 mm (1)
  • 28.05 mm (1)
  • 30.0 mm (1)
  • 32.975 mm (1)
  • 33.975 mm (1)
  • 39.975 mm (1)
  • 43.0 mm (1)
  • 43.051 mm (1)
  • 48.426 mm (1)
  • 55.0 mm (1)
  • 57.825 mm (1)
  • 70.0 mm (2)
  • 75.0 mm (2)
  • 90.0 mm (2)
  • 100.0 mm (1)
  • 120.0 mm (1)
Maximum Bore Depth Min - Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (21)
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (23)
  • W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.157 in (2)
  • 0.197 in (2)
  • 0.237 in (4)
  • 0.276 in (3)
  • 0.315 in (4)
  • 0.394 in (4)
  • 0.492 in (1)
  • 0.591 in (1)
Maximum Cutting Depth Min - Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 4.0 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (4)
  • 7.0 mm (3)
  • 8.0 mm (4)
  • 10.0 mm (4)
  • 12.5 mm (1)
  • 15.0 mm (1)
Maximum Cutting Depth Min - Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.63 in (3)
  • 1.891 in (1)
  • 2.677 in (1)
  • 3.307 in (1)
  • 3.938 in (1)
Gage Length
Gage Length
  • 16 mm (3)
  • 100 mm (1)
  • 48 mm (1)
  • 68 mm (1)
  • 84 mm (1)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (23)
  • B L (23)
  • C N (23)
  • D P (23)
  • H T (23)
  • H W (23)
backEnd
System Size
System Size
  • HSK63A (1)
  • KM50TS (1)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (28)
  • 50.0 mm (1)
  • 63.0 mm (1)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (28)
  • 1.969 in (1)
  • 2.48 in (1)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""

eBore™ • Genel amaçlı takım • Kafa • HSK63A

(1) eBore™ • Genel amaçlı takım • Kafa • HSK63A

eBore™ Genel amaçlı kullanım • İÇ ÇAP/DIŞ ÇAP Kesici uçlu tutucu için köprü

(3) eBore™ Genel amaçlı kullanım • İÇ ÇAP/DIŞ ÇAP Kesici uçlu tutucu için köprü

eBore™ • Genel amaçlı takım • Kafa • KM™

(1) eBore™ • Genel amaçlı takım • Kafa • KM™

eBore™ Genel kullanım amaçlı • Karşı ağırlık, dış çap

(1) eBore™ Genel kullanım amaçlı • Karşı ağırlık, dış çap

eBore™ Genel kullanım amaçlı • Karşı ağırlık,iç çap

(1) eBore™ Genel kullanım amaçlı • Karşı ağırlık,iç çap

eBore™ Genel kullanım amaçlı • Uzatma

(2) eBore™ Genel kullanım amaçlı • Uzatma

eBore™ Genel kullanım amaçlı • Soğutma sıvısı bağlantı kovanı

(1) eBore™ Genel kullanım amaçlı • Soğutma sıvısı bağlantı kovanı

eBore™ Genel amaçlı kullanım • Uzatma için kesici uç tutucusu • CC06

(2) eBore™ Genel amaçlı kullanım • Uzatma için kesici uç tutucusu • CC06

eBore™ Genel amaçlı kullanım • Düz bağlama için kesici uç tutucusu • CC06

(2) eBore™ Genel amaçlı kullanım • Düz bağlama için kesici uç tutucusu • CC06

eBore™ Genel amaçlı kullanım • Kesici uç tutucu, iç çap • CC06

(1) eBore™ Genel amaçlı kullanım • Kesici uç tutucu, iç çap • CC06

eBore™ Genel amaçlı kullanım • Kesici uç tutucu, dış çap • CC06

(1) eBore™ Genel amaçlı kullanım • Kesici uç tutucu, dış çap • CC06

eBore™ Genel kullanım amaçlı • Delik işleme barası • Çelik

(12) eBore™ Genel kullanım amaçlı • Delik işleme barası • Çelik

eBore™ Genel kullanım amaçlı • Delik işleme barası • Karbür

(7) eBore™ Genel kullanım amaçlı • Delik işleme barası • Karbür

eBore™ Genel kullanım amaçlı • Delik işleme barası • Ağır metal

(2) eBore™ Genel kullanım amaçlı • Delik işleme barası • Ağır metal

eBore™ Genel amaçlı takım • Kesici uç tutucusunu düz bağlama için montaj cıvatası.

(1) eBore™ Genel amaçlı takım • Kesici uç tutucusunu düz bağlama için montaj cıvatası.

eBore™ Genel amaçlı kullanım • Dengeleme ağırlığı

(1) eBore™ Genel amaçlı kullanım • Dengeleme ağırlığı
öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
product-image
Please adjust the following properties from

ISO Katalog Numarası

ANSI Katalog Numarası

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Pano bilgilerinizi görmek için oturum açmalısınız
Session expired due to inactivity, please login again
Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Numarası Kalite    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Başarılı kaydınız için teşekkür ederiz. Artık hemen giriş yapabilir ve siteyi kullanabilirsiniz.

You are about to leave the Solution building process.

Are you sure you want to leave?